Eni, Italian Oil firm
The Australian offshore safety agency NOPSEMA has ordered Eni to “make safe” a floating mid-depth buoy at the Woollybutt field off W. Australia, after the buoy, normally chained 50 meters underwater, was spotted floating on the surface, posing a navigational threat to vessels passing by.
The 5m x 9m x 8.5m buoy weighing around 40 tonnes was designed to be tethered by chains at a depth of 50 m. The depth at the field’s location is 100 meters.
The Woollybutt field is located approximately 65 km off the northwest coast of Western Australia in Lease Area WA-25-L. Production at the field ceased in May 2012, with FPSO moved away, and plans put in place for decommissioning of the field.
NOPSEMA said that Eni had informed it on August 30, of an object floating on the sea surface within WA-25-L that was suspected to be one of the two mid-depth buoys (MOBS) in the Woollybutt Field.
“Eni Australia confirmed that the object was an MDB on 3 September 2020,” NOPSEMA said.
According to NOPSEMA, Eni has informed that the buoy is within the gazetted petroleum safety zone, under 24-hour observation, and is still connected to the Woollybutt sub-sea infrastructure.
Risk to Vessels and Subsea Infrastructure
“NOPSEMA is of the opinion that the failure of the tethering system and physical presence of an object of this size poses a threat to the safety of vessels in the area and potentially to the integrity of the subsea infrastructure, including the wells,” the regulator said.
What is more, NOPSEMA had in May issued an improvement notice to Eni, after an inspection in response to the sinking of the Detachable Single Point Mooring in January 2020.
The regulator at the time said that it had been found that the sinking of the single point mooring buoy was likely as a result of a failure to maintain adequate cathodic protection which protects the buoy from corrosion.
It is during this inspection that NOPSEMA found a number of deficiencies related to the integrity management of the two mid-depth buoy (MDB) mooring systems.
Each MDB is secured by two mooring chains to their gravity base structure positioned on the seabed. During the inspection, NOPSEMA inspectors found that Eni could not demonstrate effective inspection and maintenance activities were being conducted on the MDBs, mooring chains, and mooring systems to ensure their integrity and that and they were fit for service.
It also found no evidence that annual inspections of the MDBs including their mooring chains and mooring systems were conducted in accordance with regulations.
Credit:Oedigital
